Sunday, August 9, 2015

A Finished Object

I finished the Christmas stocking I was working on. We took a week long vacation to San Diego, which gave me plenty of time to knit - we planned our vacation to have a lot of down time this year, not so go go go, which I think was great for everyone. By the time we pulled back in our driveway I only had to Kitchener the toe (I'm prone to car sickness so I couldn't look at my hands long enough while riding to finish it).

I absolutely love the way it turned out! But I wanted to try lining it so that nothing would catch on the floats if I stuffed it. While I am not an experienced sewer, lining this ended up being super easy.

I found an awesome snowflake fabric at Joann to coordinate with the knitted snowflake motif. Then I laid out my stocking on the fabric, tracing it and adding a half inch seam allowance. I cut it slightly shorter than the stocking (up to the red ridge).

I cut the first piece out, then used it to trace the second piece (turning it so I wouldn't have two front side pieces and no backside pieces.

I wanted to have the right side of the fabric showing towards the inside of the stocking so I was careful to think through which way to sew it. Using my sewing machine I sewed so the right sides were facing each other, all around the stocking except for the top. Then I turned it right side out. I turned the stocking inside out and slid the lining over the inside out stocking. Once it was on the way I wanted it, I stitched the lining to the stocking using an overlock stitch.
The great thing about this particular stocking pattern is there is basically a ridge that forms on the inside near the top, which was the perfect place to attach the lining. Once I finished attaching it I only had to flip the stocking right side out and voilĂ  it was done!